EK Water Blocks Thermal PAD F 10mm - (120x16mm)
Replacement thermal conductive pad for use with EK water blocks. Along with thermal conductivity, it provides great elasticity and elongation with natural tack on one side. Can be used multiple times, thus offering great reworkability and electrical insulation.
Thermal pads are used to fill air gaps caused by imperfectly flat or smooth surfaces which should be in thermal contact. Please consult your installation manual prior purchasing to see what size and thickness is correct for your EK water block.
Thermal conductivity: 3.5 W/mK ( /-0.35)
General dimensions: Type F (120 x 16 mm)
Thickness: 1.0 mm
Working Temperature: -55 ~ 200°C
Hardness: 5 (Shore A)
Elongation: 100%
Specific Gravity: 2.6 g/cm3 ( /- 0.2)
Flame Rating: V-0
Dielectric Breakdown Voltage: >4kV
Volume Resistance: > 10^11 Ohm-m
Main ingredient: Aluminum oxide (Al2O3) 85-95%
Delivery Information
Orders are delivered by Amazon Shipping, Evri, DPD or Royal Mail however we may choose to dispatch your order using DHL Tracked services if the order is of high value/quantity, the decision to upgrade to a tracked service is made at our discretion.
We dispatch orders within 48 hours, Monday to Friday (excluding Public Holidays).
We provide the following services to the UK:
| Delivery Type | Shipping Charge | Estimated Delivery Time in working days | |
|---|---|---|---|
| Super Saver | £1.99 | 2 to 3 days* | |
Excludes the following postcodes:
AB31-AB38,AB41-AB56,FK17-FK21,HS1-HS9,IV1-IV56,IV63,KW1-KW17,KA27,KA28,PA21-PA49,PA60-PA78,PH19-PH26,PH30-PH44,PH49,PH50,PO31-PO41,ZE1,ZE2,ZE3,IM,TR,BT,GY,JE
If your order is late please contact us using the contact us form.